|  The
TeleSpy's telephone is the same popular "Slimline" telephone
found in millions of homes. It plugs into any standard telephone jack for normal
phone operation.
By adding our patent-pending circuitry, the "Slimline"
manufacturer modifies the interior electronics while leaving the
exterior virtually unchanged. The TeleSpy circuitry requires an
AC adapter (provided) to be plugged into any standard 110V wall
outlet. The absence of this power adapter would render the TeleSpy
circuitry useless, but would not affect the telephone's normal
operation.
 The
Motion Sensor
The TeleSpy's motion sensor is PIR or Passive Infrared Technology.
The passive infrared sensor detects changes in the room's heat
signature due to occupant motion. The range is in excess of 30
feet at which point the width is about 20 feet, creating about
a 45 degree wedge beyond the sensor origin.
The Microphone
The hidden condenser microphone is strategically placed for maximum
efficiency. It is amplified to insure that the slightest of sounds
are heard, producing a high quality listening experience.
Frequently Asked Questions
How does the Self Test function help me?
The test switch on the TeleSpy powers the green LED light
near it. It tells the operator instantly when the motion sensor
detects something (light comes on). The light stays during a timed
period (the listening period) then the phone would disconnect
(light off), now, light is off and TeleSpy is instantly re-armed
for the next detection. Knowing how to use this function allows
the operator to discover the exact perameter and sensitivity of
the motion sensor within their personal environment. Operational
tip: Unplug the phone line. Now the TeleSpy will show LED light
"on" for detection and light "off" for disconnect
and reset without calling. Always remember that the first time
you turn the TeleSpy power "on" it takes 60 seconds
to arm but the LED will turn off at 30 seconds. You must wait
30 seconds after the light has gone off before the TeleSpy is
armed (only the first time.) Thereafter, when the light goes off,
the TeleSpy is instantly armed.
Can the TeleSpy™ be used in smaller homes
and apartments and homes with existing security systems?
The TeleSpy™ is an ideal solution for the smaller homes and
apartments. It will be desirable to lower and middle income dwellings,
including rented apartments, because they will be seeking affordable
security and higher income users find it a valuable supplement
to their existing systems. About 30% of TeleSpys™ sold will
be going into small businesses, garages or shops.
What if I hear a burglar?
First, be grateful you're not there but are listening from a remote
location. Never attempt to apprehend criminals. This could be
very dangerous! If professional assistance is required, call 911
or your local law enforcement emergency phone number.
How do I know my best use of my TeleSpy?
Simple, think like an intruder. If an intruder entered, where
would he come from (34% come through the front door), where would
he go? What's he want? Predicting this movement should dictate
the TeleSpy's position in the room. First place TeleSpy in the
best place, lastly run the cords. Use extension cords if necessary.
What about my pets?
Pets and motion sensors can live together. If you use the
motion sensor with the pet in close proximity it probably will
set off the sensor. Use the test light on TeleSpy to discover
for yourself the sensitivity of your pet(s), then devise a strategy
which allows the TeleSpy™ to function without pet interference;
you may find that pointing it in a specific direction or slightly
raising the unit solves the problem. Sensitivity is factory set
to trigger on about a 40 pound (5 years old) child or animal.
| 
